Guide How to Flash Motorola Droid Xyboard 8.2 MZ609 Using RSD Lite.

Guide How to Flash Motorola Droid Xyboard MZ609 Using RSD Lite.

Flash Motorola Droid Xyboard 8.2 MZ609. Flashing android device also known as installing new Android operating system. And now we will show you a simple and easy guide how to flash Flash Motorola Droid Xyboard 8.2 MZ609. And on this guide we will use additional tool to flash a new firmware using RSD Lite multi flash tool. There are many reason why people want to flash their  Motorola Droid Xyboard 8.2 MZ609. For example they want to upgrade a Android system to get a new features and customization's, or you want to fix any other problem on your Motorola Droid Xyboard 8.2 MZ609 device, such as ; bootloop, soft brick, or hard brick.

Before we proceed this guide, this is phone specifications. Motorola Droid Xyboard 8.2 MZ609 released on 2011, December. with 8,2 inches HD-IPS LCD capacitive touchscreen, 16M colors, powered by Dual-core 1.2 GHz Cortex-A9 CPU, TI OMAP 4430 Chipset, and PowerVR SGX540. Supported by 1 GB internal memory, 5 MP primary camera, 1,3 MP secondary camera. And run on Android OS, v3.2 (Honeycomb), upgradable to v4.0 (Ice Cream Sandwich).

Flashing Guide.

1. Always backup your Motorola Droid Xyboard 8.2 MZ609 data and file before flashing this device.
2. Make sure you have enough battery capacity, try to keep your battery at 75 % battery capacity.
3. Use original USB cable to connect between your Motorola Droid Xyboard 8.2 MZ609 to the computer.
4. Make sure Motorola Droid Xyboard 8.2 MZ609 driver already installed on your computer, If you don't have this driver yet. download via this link below.

https://androidmtk.com/download-motorola-usb-drivers

5. Then download and install RSD lite Multi Flash tool from official website.

http://rsdlite.com/rsd-lite-download/

6. Now, download Motorola Droid Xyboard 8.2 MZ609 firmware file.

https://firmware.center/firmware/Motorola/Xyboard%20%28Xoom%202%2C%20Droid%20Xyboard%29/Stock/VRZ_MZ609_1.6.0_279_1FF.xml.zip

7. Then, boot Motorola device to bootloader mode. How to do it ?
• Power off the phone, by press and hold power button for a seconds, it will completely turn off the device.
• Now, press and hold both volume down + volume up button.
8. Then, connect your Motorola Droid Xyboard 8.2 MZ609 to the computer via USB cable.
9. Make sure your Motorola Droid Xyboard 8.2 MZ609 successfully detected on your computer via fastboot mode.
10. If failed, try to change your USB cable or computer port.
11. Now, Open RSD Lite from start menu.

    

    rsd lite flash tool

12. Click the button assigned with red circle show at picture above to load Motorola Droid Xyboard 8.2 MZ609 firmware.
13. Fimrware file should have this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
14. Once your firmware successfully load, RSD lite should look like picture shown below.

    

    rsd lite

15. Now click start button.
16. Flashing process will start automatically without your interference.
17. Wait a while until flashing your Motorola Droid Xyboard 8.2 MZ609 finish.