Guide Flash Firmware on Android Motorola Droid Xyboard 10.1 MZ617.

Flash Motorola Droid Xyboard 10.1 MZ617. This guide below will explain a simple guide how to flash or install anew firmware on Motorola Droid Xyboard 10.1 MZ617. If you have any problem on your Motorola Droid Xyboard 10.1 MZ617 device, and this problem should be solved with flash this device. Now you can continue to read and apply this guide on your Motorola Droid Xyboard 10.1 MZ617 device. We need a special tool especially designed for Motorola device to help flash the firmware, this software is free called with RSD lite.

Here is detail specifications of Motorola Droid Xyboard 10.1 MZ617, this device released on 2011, December. With 10,1 inches HD-IPS LCD capacitive touchscreen, 16M colors, powered by Dual-core 1.2 GHz Cortex-A9 CPU, TI OMAP 4430 Chipset, and PowerVR SGX540. Supported by 1 GB internal memory, 5 MP primary camera, 1,3 MP secondary camera. And run on Android OS, v3.2 (Honeycomb), upgradable to v4.0 (Ice Cream Sandwich).

Flashing guide start here.

Preparations before flash.

1. Flashing process will erase all data and file stored in Motorola Droid Xyboard 10.1 MZ617 internal memory. So, we recommend you to always back up it before perform flash this device.
2. Flashing process will take a while, therefore don't let your battery at empty state. Try keep your battery at 78% minimum of capacity.
3. Use original USB cable to connect between your Motorola Droid Xyboard 10.1 MZ617 to the computer.
4. Make sure Motorola Droid Xyboard 10.1 MZ617 driver correctly installed on your computer, If you don't have this driver yet. download via this link below.

https://androidmtk.com/download-motorola-usb-drivers

5. Then download and install RSD lite Multi Flash tool from official website.

http://rsdlite.com/rsd-lite-download/

6. Now, download Motorola Droid Xyboard 10.1 MZ617 firmware file.



https://firmware.center/firmware/Motorola/Xyboard%20%28Xoom%202%2C%20Droid%20Xyboard%29/Stock/VRZ_9.8.2OT_127_MZ617_CFC_1FF.xml.zip

Flashing Motorola Droid Xyboard 10.1 MZ617.

1. Now, boot Motorola device to bootloader mode. How to do it ?
• Power off the phone, by press and hold power button for a seconds, it will completely turn off the device.
• Now, press and hold both volume down + volume up button.
2. Then, connect your Motorola Droid Xyboard 10.1 MZ617 to the computer via USB cable.
3. Make sure your Motorola Droid Xyboard 10.1 MZ617 successfully detected on your computer via bootloader mode.
4. If failed, try to change your USB cable or computer port.
5. Now, Open RSD Lite from start menu.

   

   rsd lite flash tool

6. Click the button assigned with red circle show at picture above to load Motorola Droid Xyboard 10.1 MZ617 firmware.
7. Fimrware file should have this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
8. Once your firmware successfully load, RSD lite should look like picture shown below.

   

   rsd lite

9. Now click start button.
10. Flashing process will start automatically without your interference.
11. Wait a while until flashing your Motorola Droid Xyboard 10.1 MZ617 finish.